- Ayal
- 25 באוג׳ 2024
- זמן קריאה 7 דקות
עודכן: 5 בינו׳
מדריך זה מסביר באופן מקיף כיצד לבצע עדכון תוכנה לרחפן איבו מקס. בעזרת מדריך זה ניתן לעדכן או לשנמך את הרחפן בהתאם לקבצי העדכון.
הקבצים הניתנים כאן מיועדים לשנמוך או שדרוג הרחפן לגרסה העדכנית ביותר לפני תוספת ה-No Fly Zone על ישראל. ניתן להשתמש במדריך זה עם קבצי עדכון שונים בהתאם לצורך.
גרסאות מעל 1.7.0.51 כוללות את אוזרי ה-No Fly Zone:
אזורים: Israel, Palestine, Russia, Ukraine, Taiwan, Arunachal, Kashmir, Myanmar
גרסת שנמוך:
שנמוך לגרסה | גרסאות | |
שחרור | ||
V1.7.0.51 | V1.7.0.111+ | רחפן |
V1.6.0.59 | V1.6.0.103+ | שלט |
עדכון הרחפן לגרסה הרצויה:
כדי לאלץ את הרחפן או השלט לבצע עדכון לגרסה הרצויה, עלינו לכלול תמיד את הקובץ upgradeProfile.json באותה ספרייה כמו הקבצים "ModelX" ו-"RC79" עם סיומת ה-".uav"
סרטון לווידאו המציג את תהליך העדכון במלואו:
עדכון רחפן - איבו מקס
שנמוך ידני לרחפן לגרסת V1.7 (גרסת רחפן: V1.7.0.51)
הערה: יש לוודא שהרחפן עם סוללה טעונה במלואה לפני ביצוע העדכון ושכרטיס ה-SD ריק.
1. נא הורד את קבצי התוכנה של השלט וחלץ את את הקובץ, עם הכללת הקובץ “upgradeProfile.json”.
2. העתק את הקבצים "ModelX-Vx.xx.xx…" ו-“upgradeProfile.json” לכרטיס ה-SD.
3. הפעל את הרחפן והמתן 30 שניות עד שאורות הרחפן יתחילו להבהב בצבע יחיד.
4. הכנס את כרטיס ה-SD לתוך הרחפן מאחור.
5. הרחפן יתחיל להבהב במהירות, מה שמעיד על כך שתהליך העדכון מתבצע.
6. בדוק אם הרחפן מתעדכן כראוי לאחר 3 דקות:
אם העדכון עדיין בתהליך, הרחפן ימשיך להבהב במהירות באורות ירוקים וכחולים כפי שמוצג בסרטון.
במקרה של עדכון שנכשל, הרחפן יציג אור אדום מהבהב לאט למשך יותר מדקה כפי שמוצג בסרטון. במצב כזה, עבור ישירות לשלב 9.
7. תהליך העדכון צפוי להימשך כ-15-20 דקות. ברגע שאורות הרחפן נשארות דולקות באופן רציף כפי שמוצג בסרטון, זה אומר שעדכון תוכנה של הרחפן הושלם בהצלחה.
8. להשלמת התהליך, אנא בצע הפעלה מחדש לרחפן, ואשר שהרחפן והשלט יכולים להתחבר ושניהם על גרסת תוכנה תואמת.
אם עדכנת את התוכנה בהצלחה, אנא התעלם מהשלב שלהלן.
9. אנא הורד את קבצי התוכנה ללא הצפנה (non_EN) של הרחפן. וחזור על השלבים מ-2 עד 8, עם הכללת הקובץ “upgradeProfile.json”
ישנן שתי גרסאות של גרסת תוכנה 1.7: "EN" ו-"non-EN". שתי הגרסאות מניבות את אותה תוצאה; הבחירה ביניהן תלויה בגרסת התוכנה הנוכחית של הרחפן. עם זאת, מאחר שלא ניתן לחבר את הרחפן והשלט כדי לקבוע את גרסת התוכנה של הרחפן, אנחנו ממליצים לנסות תחילה את גרסת ה-EN. אם לא מצליח, אז נסה את גרסת ה-non-EN.
עדכון שלט - איבו מקס
שנמוך ידני לשלט לגרסת V1.7 (בשלט: V1.6.0.59)
הערות:
אנא ודא שהשלט טעון במלואו לפני ביצוע העדכון.
אם יש לך את גרסת Autel (אמריקאית / עם לוגו Autel), הורד את הקובץ “RC79.Autel”. אם יש לך את הגרסת Neutral (אירופאית / עם לוגו UAV), הורד את הקובץ “RC79.Neutral”.
ניתן לזהות איזו גרסה יש לך על פי האם הלוגו של Autel מופיע על זרוע הרחפן או כאשר אתה מדליק את השלט, יש לך את גרסת Autel.
אם אין לוגו על זרוע הרחפן והשלט מציג את הלוגו UAV בזמן ההדלקה, יש לך את הגרסת Neutral.
אם יש לך משהו שונה או שאתה נתקל בבעיה, אנא צור קשר בתחתית מסמך זה ואנו נשמח לעזור לך ללא עלות.
1. אנא הורד את קבצי התוכנה התואמים של השלט וחלץ את הקובץ, עם הכללת הקובץ “upgradeProfile.json”.
2. שים את הקבצים "RC79.Autel/Neutral-Vx.xx.x" ו-“upgradeProfile.json” על כרטיס SD, באמצעות מתאם USB או כונן USB ולוודא שהוא ריק.
3. הדלק את השלט והמתן דקה כדי שהמערכת תדלק.
יש להכניס את כונן ה-USB לשלט ולהמתין להבהוב אורות השלט לאחר שתי דקות מהכנסת הכונן. יש לוודא שהכנסת את קובץ ה‘upgradeProfile.json’ לכונן ושהוא ריק מלבד קבצי ההתקנה. אם הקובץ נמצא, יש לבצע את השלב מחדש, אך לא לפתוח את האפליקציה ולהמתין להבהוב אורות השלט לאחר שתי דקות מהכנסת כונן ה-USB.
5. נורית מצב הסוללה של השלט תתחיל להבהב, מה שמעיד על כך שתהליך העדכון מתבצע.
● אם האפליקציה מציגה שגיאת עדכון עם קוד CODE_10011, אנא דלג ישירות לשלב 8 במקרה כזה. אם האפליקציה מציגה קוד שגיאה אחר, אנא עיין ברשימת קודי השגיאה כדי לזהות את הבעיה. בדרך כלל כדאי לנסות לעדכן שוב, שכן לעיתים ניסיון שני עשוי לפתור את הבעיה.
6. תהליך העדכון צפוי להימשך כ-15-20 דקות. ברגע שנורית החיווי נשארת דולקת באופן רציף, זה אומר שעדכון תוכנה הושלם.
7. להשלמת התהליך, אנא בצע הפעלה מחדש לשלט, ובדוק שוב את גרסת התוכנה.
אם עדכנת את התוכנה בהצלחה, אנא התעלם מהשלב שלהלן.
8. אנא הורד את קבצי התוכנה התואמים של השלט וחלץ את את הקובץ. חזור על השלבים מ-2 עד 7 עם הכללת הקובץ “upgradeProfile.json”
ישנן שתי גרסאות של גרסת תוכנה 1.7: "EN" ו-"non-EN". שתי הגרסאות מניבות את אותה תוצאה; הבחירה ביניהן תלויה בגרסת התוכנה הנוכחית של הרחפן. עם זאת, מאחר שלא ניתן לחבר את הרחפן והשלט כדי לקבוע את גרסת התוכנה של הרחפן, אנחנו ממליצים לנסות תחילה את גרסת ה-EN. אם לא מצליח, אז נסה את גרסת ה-non-EN.
פתרון בעיות עדכון - קוד שגיאה
Error Code | Error Code | Handling Method |
CODE_M_1 | Parsing failed | Message parsing error; Recovery method: Restart the remote control and the aircraft, then try again. |
CODE_M_2 | Empty response data | Message content missing; Recovery method: Restart the remote control and the aircraft, then try again. |
CODE_M_3 | Response timeout | Upgrade response timeout; Recovery method: Restart the remote control and the aircraft, then try again. |
CODE_M_4 | Incorrect response code | Response result error; Recovery method: Restart the remote control and the aircraft, then try again. |
CODE_M_5 | Device not connected | Remote control and aircraft not connected; Recovery method: Re-pair the connection, then try again. |
CODE_M_6 | Duplicate request | Duplicate request; Recovery method: The upgrade is already in progress, wait for the upgrade to complete. |
CODE_10000 | No Error | No error. |
CODE_10001 | In flight | Cannot upgrade during flight; Recovery method: Land the aircraft/stop the propellers, then upgrade. |
CODE_10002 | In upgrading | Currently upgrading; Recovery method: Wait for the current upgrade to complete before trying again. |
CODE_10003 | MD5 Error | Product package verification failed; Recovery method: Please restart and try again (the product package will be re-uploaded during the retry). |
CODE_10004 | File does not exit | Product package file missing; Recovery method: Please restart and try again (the product package will be re-uploaded during the retry). |
CODE_10005 | Low Battery | Low battery; Recovery method: Replace the battery, then try again. |
CODE_10006 | Model Does not match | Product model mismatch; Recovery method: Ensure that the current product matches the current upgrade package. |
CODE_10007 | Insufficient space for upgrade | Insufficient upgrade space; Recovery method: Ensure the SD card has enough space, or consult R&D for analysis. |
CODE_10008 | Error in header of pacakge | Product package internal configuration error; Recovery method: Try restarting and then retrying; if the same error occurs, report it to customer service. |
CODE_10009 | Error in signature, untrusted firmware | Upgrade package from unknown source; Recovery method: Seek customer service and obtain the upgrade package from an official source. |
CODE_10010 | Error in firmware size, header mismatch | Upgrade package header file does not match the package content; Recovery method: Seek customer service and obtain the upgrade package from an official source. |
CODE_10011 | Package error | Upgrade package unusable; Recovery method: Seek customer service and obtain the upgrade package from an official source. |
CODE_10012 | Error in major version, firmware mismatch | Product package major version number mismatch; Recovery method: Please use the correct product package. |
CODE_10013 | Lower than the current version, force flag required | Already on the latest version, no upgrade needed; Recovery method: No upgrade needed. (UpgradeProfile.json Missing) |
CODE_10014 | Refused upgrade request, error description for more details | Special error; Recovery method: Retry to resolve; or provide logs to R&D for analysis. |
CODE_10015 | Special error for each package, details in errDesc | Special error; Recovery method: Retry to resolve; or provide logs to R&D for analysis. |
CODE_20001 | Successfully switched to high-speed transmission mode, but disconnected after 60 seconds | Up-down link switch successful, but exited high-speed mode after 60 seconds; Recovery method: Retry to resolve. |
CODE_20002 | Successfully switched to high-speed transmission mode, but after 60 seconds, still in a different mode | Up-down link switch successful, but did not enter high-speed mode after 60 seconds; Recovery method: Retry to resolve. |
CODE_20003 | Failed to switch to high-speed transmission mode after 3 retries | High-speed mode switch failed (tried 3 times); Recovery method: Retry to resolve. |
CODE_20004 | Set to high-speed mode, check transmission mode for 60 seconds, high-speed upload, high-speed download, or exit status (no processing, direct error) | Failed to set high-speed upload mode, remote control failed to send upgrade package to the aircraft; Recovery method: Retry to resolve. |
CODE_20005 | Set high-speed mode, failed to check transmission mode after 5 attempts | Unable to detect current transmission mode; Recovery method: Restart, then retry to resolve. |
CODE_20006 | Successfully switched to normal transmission mode, but disconnected after 60 seconds | Remote control disconnected from the aircraft after uploading the upgrade package; Recovery method: Restart, then retry to resolve. |
CODE_20007 | Successfully switched to normal transmission mode, but after 60 seconds, still in a different mode | Remote control unable to switch back to normal wireless connection mode after uploading the upgrade package; Recovery method: Restart, then retry to resolve. |
CODE_20008 | Exit high-speed mode, check transmission mode for 60 seconds, high-speed upload, high-speed download, or exit status (no processing, direct error) | Remote control and aircraft unable to switch back to normal wireless connection mode after uploading the upgrade package; Recovery method: Restart, then retry to resolve. |
CODE_20009 | Exit high-speed mode, failed to check transmission mode after 5 attempts | Unable to confirm current communication status after exiting high-speed upload mode; Recovery method: Restart, then retry to resolve. |
CODE_20010 | Upgrade package verification failed | Unable to confirm current communication status after exiting high-speed upload mode; Recovery method: Restart, then retry to resolve. |
CODE_20011 | Upgrade execution failed | Upgrade package MD5 verification failed; Recovery method: Restart, then retry (the package will be re-uploaded). |
CODE_20012 | MD5 verification failed for the first firmware package file downloaded | Specific module upgrade execution failed; Recovery method: Retry, or provide logs to R&D for analysis. |
CODE_20013 | Failed to enter transmission upgrade mode after 3 prompts | APP downloaded upgrade package verification failed; Recovery method: Provide logs to R&D for analysis. |
CODE_20014 | Failed to upload firmware after 100 retries | Unable to switch to high-speed upload mode; Recovery method: Restart, then retry. |
CODE_20015 | Failed to switch to normal transmission mode after 3 retries | Failed to upload upgrade package; Recovery method: Restart, then retry. |
CODE_20016 | Upgrade not completed within 20 minutes | Upgrade not completed within 20 minutes, upgrade timeout; Recovery method: Provide logs to R&D for analysis. |
CODE_20017 | No progress update within 2 minutes of upload | Upload progress not updated for 2 consecutive minutes, indicating upload blockage; Recovery method: Restart, then retry. |
עבד מעולה
תודה רבה